Wago Connector

Product Details:

Terminal Block, Pluggable, 3POS, 12AWG
Solid-state relays for high power applications switch both ac or dc currents using no moving parts. They instead use a semiconductor, such as a silicon-controlled rectifier (SCR), TRIAC (triode for alternating current), or switching transistor to switch current

Additional Information:

• Item Code: 770-203

Product Details:

To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range of Wago Connector. it is a compact slicing connector.

Product Details:

Pitch Spacing: 5mm No. of Positions: 6WaysWire Size (AWG): 28AWG to 12AWGConductor Area CSA: 2.5mm²Wire Connection Method: ClampRated Current: 12ARated Voltage: 320VProduct Range: 231 Series

Product Details:

We offer Wago 2 Pole Connector

Product Details:

The 260-331 is a 4-position 1-level modular DIN rail Terminal Block with fixing flange, for screw or similar mounting types. 1.5mm² cross-section, clamp wire connection method, side-entry wiring and grey colour.

Product Details:

The 224 series Lighting Connector connects solid conductors with fine-stranded conductors. It is the ideal connection between solid and fine-stranded conductors.  The 224-201 Grey Service Connector allows for fine stranded cables to be connected together by pressing the blocks without the need for any tools.

• Service connector for two stranded conductors
• Current Rating: 24A
• Voltage Rating: 400V
• W: 8mm x H: 15.5mm x D: 42mm

Product Details:

To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range of Rail Mounted Terminal Blocks.

Product Details:

The 280-901 from Wago is a 2 conductor through DIN rail terminal block. This terminal block is suitable for wire size ranging from 28AWG to 12AWG.

• Gray colour terminal block
• Dimension of terminal block is 28mm x 53mm x 5mm (H x L x W)
• Weight of 5.3g
• Front entry wiring
• Horizontal design

Product Details:

The 280-101 from Wago is a 2 conductor through DIN rail terminal block equipped with Wago's advanced CAGE CLAMP. This terminal block is suitable for wire size ranging from 0.08 to 2.5 sqmm.

• Grey colour terminal block
• Dimension of terminal block is 30.5mm x 42.5mm x 5mm (H x L x W)
• Weight of 3.921g
• Side entry wiring

Product Details:

We offer Side Entry Rail Mounted Terminal Blocks.

Product Details:

Description:

• SMD PCB terminal blocks with Push-in CAGE CLAMP^® connection and push-buttons
• Height of just 4.5 mm minimizes on-board LED shadowing
• Available in tape-and-reel packaging for automated assembly

Note:

Application note:Suitable for lead-free, reflow-soldering profiles per DIN EN 61760-1 and IEC 60068-2-58 up to max. 260 °C peak temperature. Due to customer-specific variables (e.g., component configuration and orientation, type of soldering machine, solder paste), trial runs are recommended to ensure product and process compatibility under actual manufacturing conditions.

Recommendation:

Recommendation for SMD stencil: Material thickness, 150 µm. Pattern layout identical to solder pad layout.

 

Specification:

Additional Information:

• Item Code: 2060

Product Details:

The 787-722 is a 1-output DIN rail mount EPSITRON ECO primary switched-mode Power Supply enclosed for use in switchgear cabinets. It features natural convection cooling when horizontally mounted, short-circuit protection and overvoltage protection via varistor at primary circuit. An external DC fuse is required for the DC input voltage.

• Primary switch mode
• Prepared for class I equipment
• Parallel operation, series connection possible
• 82% Typical efficiency
• IP20 (according to EN 60529) Protection rating
• 1% Adjustment accuracy
• No-load proof

Product Details:

Signal Conditioners and Isolation Amplifiers...

We are providing best qulaity products......

Additional Information:

• Item Code: 857-401

Product Details:

Decentralized peripherals for every application: Boasting more than 500 I/O modules, programmable controllers and fieldbus couplers, WAGO's remote I/O system offers all the functions required for your automation needs – and for every fieldbus.

Product Details:

Interfac Modules for Sub-D connectors, Mal Connectors, for mating connectors with solder connection, 289 series

Additional Information:

• Item Code: 289-585

Product Details:

The 256-401 is a grey modular PCB Terminal Block with pushbutton and CAGE CLAMP connection technology.

• Convenient and Tool-free Operation
• Polyamide 6.6 (PA 6.6) Insulating
• Chrome-nickel Spring Steel Clamping
• Electrolytic Copper Contact

Product Details:

Eco Fieldbus Coupler, I/O Module

• manufacturer - Wago
• the fieldbus coupler can be used with multiple items like Interbus, Modbus, Ethernet, Profibus

Product Details:

Slim Relay Module
Series 857

Additional Information:

• Item Code: 857-304

Product Details:

SMD CONNECTOR 

Product Details:

The 790-108 is a Shield Clamping Saddle for use with terminal blocks. 

• Rating - 24A
• Colour - Silver
• Brand - Wago
• Product Part - 790 series

Product Details:

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP actuation
• For "wire-to-wire" and "board-to-wire" connections
• Integrated test ports
• 2 Locking latches with 4 coding fingers

Product Details:

• 4,6,8 way sensor actuator boxes
• cable lenght 5 and 10 m
• 4 poles

Product Details:

High-Current through/ground conductor 35 sqmm - 285 series